Non-Contact Thickness Measuring System
THS
THS series is a non-contact thickness/height/depth measuring system based on an optical type focal point detection method, incorporating the two microscope optical systems of the top and bottom, with precise focus indicator using index graticule. Thickness can be measured up to 10mm with observing the surface of measuring point. Because of an optical system, operations are simple, and the precise focus indicator (Target Mark) can be seen on a monitor at a just focus condition.

THS-10 Manual Type



Specifications
0
THS-10
THS-20
Measuring area
X:100mm Y:100mm
X:100mm Y:100mm
Measuring time
-
6 - 8 sec/point
Resolution
1m(0.1m option)
0.1m
Repeatability
-
1s=0.5m(testing block gauge)
Stage
Manual traveling, X,Y reading by linear scale, Min 1m reading
Travel by pulse motor, move to coordinate position, pitch feed movement available,
4 kinds of modes available
Carrier system
-
-
Detector for Orientation Flat
-
-
THS-20 Automatic Type
Z-axis movement of top and bottom optical systems are operated manually, and thickness measurements are performed on a monitor screen. Measurement resolution is 1m as standard, and 0.1m as option.

THS-20 is an automatic system combining auto focus and pulse stage.
X, Y or Z coordinate position, pitch feed, etc. by pulse motor drive are measured in sequential operation. Adopting image processing auto focus, high-reliable repeatability is achieved without individual differences. Also incorporating leading-edge technology, user-friendliness has been improved by Windows' base user interface.
(user-friendliness improved by Windows version)